Skip to content

An interface to control a YASKAWA GP7-YRC1000 industrial robotic arm through a teleoperation method.

Notifications You must be signed in to change notification settings

yudarw/YASKAWA-Robot-Teleoperation

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

21 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

YASKAWA-Robot-Teleoperation

An interface to control a YASKAWA GP7-YRC1000 industrial robotic arm through a teleoperation method. This project uses a 3DS Haptic Teleoperation device to control the robot.

Config

Driver Installation

If you are fisrt time using haptic, you need to install the haptic driver and the OpenHaptic plugin for C++. Find the driver in the link below.

Open Haptic 3.4 : https://support.3dsystems.com/s/article/OpenHaptics-for-Windows-Developer-Edition-v34?language=en_US

3DS Haptic Driver: https://support.3dsystems.com/s/article/Haptic-Device-Drivers?language=en_US

Project configuration

The program is written in Visual Studio 2019 C++. However, we need to install Visual Studio 2010 since the haptic driver only supports the v100 platform toolset.

Config

  1. Select the project configuration as Release and the platform x86.

  2. Open the ProjectProperties. In General set the properties as follow:

    • Platform Toolset : Visual Studio 2010 (v100)
    • Use of MFC : Use MFC in a Shared DLL
    • Character Set : Use Multi-Byte Character Set
  3. Next go to C/C++ --> General, under the Additional Include Directories add the these following path to your OpenHaptic include.

    • C:\OpenHaptics\Developer\3.4.0\utilities\include
    • C:\OpenHaptics\Developer\3.4.0\Quickhaptics\header
    • C:\OpenHaptics\Developer\3.4.0\include
  4. After that go to Linker --> General and under the Additional Library Directories add the libs directory:

    • C:\OpenHaptics\Developer\3.4.0\utilities\lib\Win32\Release
    • C:\OpenHaptics\Developer\3.4.0\Quickhaptics\lib\Win32\Release
    • C:\OpenHaptics\Developer\3.4.0\lib\Win32\Release
  5. We also need to specify the name of the lib files. Under the Linker select Input and then add the following lib files.

    hd.lib
    hdu.lib
    hl.lib
    ws2_32.lib
    

About

An interface to control a YASKAWA GP7-YRC1000 industrial robotic arm through a teleoperation method.

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published