Skip to content
This repository has been archived by the owner on Jun 12, 2020. It is now read-only.

xetus-oss/salt-testbed

Repository files navigation

A small, reasonably configurable, vagrant-based testbed for saltstack + Ubuntu/Windows.



Testbed Overview

  • Consists of 5 VMs, primarymaster, secondarymaster, minion1, minion2, and winminion. Only primarymaster and minion1 are started by default.
  • Allows for yaml-based configuration of practical provisioning parameters on a per VM basis (salt version, cpus, memory amount, etc) through a local testbed.yaml file. See testbed-defaults.yaml for more information.
  • Connects all the VMs to a common private network with consistent static IP addresses for each VM.
  • Includes provisioning scripts that externalize the salt configuration (/etc/salt/) to host-data/{system_name}/etc-salt.
  • Provides scripts to make it easy to run saltstack from locally built source code (useful for salt hacking).

Windows Minion Caveats

  • Windows VMs can only be configured with a stable version of Salt; see the Vagrant Salt Provisioner documentation for more details.
  • Windows VMs can not be configured as masters; see the Vagrant Salt Provisioner documentation for more details.
  • Windows VMs are big compared to Ubuntu VMs. Plan on grabbing a couple of coffees while the VM downloads, and expect to use a couple of gigs of memory for the running VM.

Quick Start

To quickly get a master and mininon speaking with each other

(1) Create the default machines

vagrant up

(2) Replace the etc-salt/minion file in the host-data folder for each host with the following line

master: 192.168.50.21

(3) On each system, issue the following command

Ubuntu Minion

vagrant ssh {system_name}
sudo systemctl restart salt-minion

Windows Minion

  1. Open a GUI into the Windows minion (e.g. via VirtualBox)
  2. Open a PowerShell prompt (as adminstrator)
  3. Run the folloowing:
Restart-Service salt-minion

(4) Prove that all systems are connected

vagrant ssh primarymaster
# note: you may or may not need to accept all keys
sudo salt-key -A
sudo salt '*' test.ping

Configuration

The testbed-defaults.yaml describes the various configuration parameters, including the VM resources and the saltstack version to install. The values below the vm_defaults key are applied to each entry under the vms key, unless specified.

The default values can be overwritten by creating a testbed.yaml file in the root directory and defining alternate values.

About

VM Private Network Addresses

Host Private IP
primarymaster 192.168.50.21
secondarymaster 192.168.50.22
minion1 192.168.50.23
minion2 192.168.50.24
winminion 192.168.50.25

Externalized Salt Configuration

The data associated with each host is persisted outside of the individual VMs to make testing easier. However, this also means that you have to remember to update configuraton data between test scenarios, even if you destory the VMs.

Scenario Testing Hints

The recommended usage for this testbed is to run specific scenario tests that can be easily re-created. Below is a suggsted directory structure:

	_vagrantsupport/
	docs/
	host-data/
	host-scripts/
	salt/ (** Clone formulas, modules, etc, under this directory)
	srcs/ (** Clone source code, typically salt, under this directory)
	testbed-scenarios/ (** maintain test scenarios, under version control, in this directory) 

Using a Different Version of Salt

By default the testbed installs Salt v2018.3.2 on all VMs. You can switch to a different release version by setting the vm_defaults:version value in your testbed.yaml override file.

Using a Remote Fork of Salt

You can use a remote fork of Salt with the following settings in your testbed.yaml override file (obivously replacing the github.com URL with the ):

  1. vm_defaults:version: {{ git branch }}
  2. vm_defaults:ubuntu_config:salt_install_type: git
  3. vm_defaults:ubuntu_config:salt_bootstrap_options: "-g {{ git repository URL }}"

For example:

vm_defaults:
  version: v2015.8.7-xetus-patches
  ubuntu_config:
    salt_install_type: git
    salt_bootstrap_options: "-g https://github.com/xetus-oss/salt.git"

Saltstack Development

Whenever we do major upgrades of saltstack, we find we that need to contribute fixes or enhancements before we can move to the next version. This can be very time consuming and we have a series of scripts to make it less painful to run a development version of saltstack.

The easiest way to get a development version of saltstack up and running in the testbed is to use the host-scripts/ubuntu_development_setup.bash script. As the name suggests, it's only intended to work on Ubuntu.

From within a VM, call the script with a salt source directory and it will handle setting up a virtual environment with that development version installed for you. For example:

/vagant/host-scripts/ubuntu_development_setup.bash /vagrant/srcs/salt/

After that, you can manage starting and stopping the development version of salt using the handy host-scripts/salt_dev_ctl.bash script.

note: not available for the Windows minion

Testbed Development

When making changes to the testbed please:

  • add comments to the changelog when contributing your Pull Request, especially if making breaking changes
  • run and update the ConfigLoaderTest to ensure you haven't made any unexpected changes.

Running the Testbed Tests

To run the tests:

ruby _vagrantsupport/ConfigLoaderTest.rb 

FAQ

Why not just use kitchen-salt for all your integration testing?

Kitchen-salt is great! But there are lots of situations where a small configurable testbed is more convenient. A few examples:

  1. Developing against the saltstack source.
  2. Testing of complex scenarios, especially when more than 1 host is involved, like failover in a multi-master environment or orchestration scripts.
  3. Preparing infrastructure changes to your version of salt and/or Ubuntu distrobution.

About

A Vagrant-based testbed for saltstack work

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •