Skip to content
This repository has been archived by the owner on Jul 21, 2023. It is now read-only.
/ scalendar Public archive

DEPRECATED: Haskell Library to deal with resource availability in a Calendar

License

Notifications You must be signed in to change notification settings

stackbuilders/scalendar

Repository files navigation

Hackage version No Maintenance Intended

⚠️ Warning: This library has been deprecated and is no longer maintained. It will not receive any further security patches, features, or bug fixes and is preserved here at GitHub for archival purposes. If you want to use it, we suggest forking the repository and auditing the codebase before use. For more information, contact us at info@stackbuilders.com.

DEPRECATED - scalendar: Haskell Library to deal with resource availability in a Calendar.

This is a library for handling calendars and resource availability based on the top-nodes algorithm and set operations. That's why it is called scalendar: Calendars which which keep track of the availability of a set of resources. Since the bare top-nodes algorithm is not enough to IDENTIFY which are the specific resources which are available in a given period of time - for example, the id of the rooms which can still be reserved in a given (checkIn-checkOut) interval - it was necessary to generalize that algorithm to work on sets of strings which identify the available resources in a period. That generalization was pretty smooth since addition in numbers was replaced by set Union and substraction in numbers was replaced by set Difference. Another important fact about sets is that they do not allow duplicates, so every identifier is guaranteed to be unique.

Introduction

Data Types

scalendar is a library based on binary trees, where a Calendar is defined as follows:

data Calendar =
    Unit TimePeriod (Set Text) (Set Text)
  | Node TimePeriod (Set Text) (Set Text) Calendar Calendar

data TimePeriod =
    TimeInterval UTCTime UTCTime
  | TimeUnit UTCTime

The idea is that each node in the calendar will store a TimePeriod which is a data type which stores a time-interval with anstart-date and an end-date.

The purpose is that terminal nodes (leaves) will represent a unit of time, TimeUnit, which in this case is a nominal day or 86400 seconds. Thus non-terminal nodes are intended to store a TimeInterval and leaves are intended to store TimeUnits. Both leaves and nodes store Q and QN sets, which are the data structures which allow the Calendar to keep track of the availability of a set of resources. For more information about the time representation according to the top-nodes algorithm check this

Knowing what the Q and QN sets mean is not quite important to use this library but roughly:

  • QN(Node) represents reserved elements for all reservations having this node as top-node
  • Q(Node) = U(Q(LeftChild), Q(RightChild)) U QN(Node)

In order to use this library, it only suffices to know the meaning of the following data type:

data SCalendar = SCalendar
  { calUnits :: Set Text
  , calendar :: Calendar
  } deriving (Eq, Show)

An SCalendar is only a product type of a set of identifiers and a group of available resources - for example, the numbers which are used to identify rooms in a hotel {"101", "102", ...} - and a Calendar, which is the tree that keeps track of the availability of that set of resources.

Other important data types are:

  • data Reservation = Reservation
      { reservUnits :: Set Text
      , reservPeriod :: TimePeriod
      }
    

    which represents a set of resources we want to reserve over a TimePeriod in a SCalendar.

  • data Cancellation = Cancellation
      { cancUnits :: Set Text
      , cancPeriod :: TimePeriod
      }
    

    which represents a set of resources we want to cancel over a TimePeriod in a SCalendar

  • data Report = Report
      { reportPeriod :: TimePeriod
      , totalUnits :: Set Text
      , reservedUnits :: Set Text
      , remainingUnits :: Set Text
      }
    

    which represents a Report for a given TimePeriod where a Report has the following information:

    • totalUnits: The set of total identifiers for resources which can be reserved in a SCalendar.
    • reservedUnits: The set of identifiers for resources which have been reserved for a TimePeriod.
    • remainingUnits: The set of remaining identifiers for resources which can still be reserved without creating conflicts in a TimePeriod.

Creating a Calendar

Functions to create Calendars are located in Time.SCalendar.Types

To create a bare Calendar which is not associated to any set of identifiers we can use

createCalendar :: Integer -- Year.
               -> Int -- Month.
               -> Int -- Day.
               -> Int -- NumDays.
               -> Maybe Calendar

where

  • Year: It is an Integer representing the starting year of the Calendar. For example 2017.
  • Month: It is an Int representing the starting month of the Calendar. For example, 2 is equivalent to February.
  • Day: It is an Int representing the starting day of the Calendar. It can be any number representing one of the days of Month.
  • NumDays: It is the number of Days we want our Calendar to cover. The days covered by it will always be a power of 2. Thus if you input 30, createCalendar will find the first power of 2 which is greater or equal to 32, in this case 2^5 = 32.

So if everything is ok, this function Just returns a new Calendar which is suitable for the given NumDays. A new Calendar is one which has neither reservations nor cancellations.

createSCalendar is almost like createCalendar but instead of returning a bare Calendar, it returns an SCalendar which is a Calendar together with a set of identifiers (of type Text) which uniquely identify a group of available resources. The following example create an SCalendar of 2 ^ 8 = 512 days starting from 2016-February-2 with a set of identifiers { a, b, c, d }

createSCalendar :: Integer -- Year.
                -> Int -- Month.
                -> Int -- Day.
                -> Int -- NumDays.
                -> Set Text -- Set of Identifiers
                -> Maybe SCalendar

createSCalendar 2017 2 1 365 (Set.fromList ["a", "b", "c", "d"])

Checking Availability

There are two functions to check availability for a reservation. The first one is

isQuantityAvailable :: Int -> TimePeriod -> SCalendar -> Bool

where Int is an amount of resource we want to reserve, TimePeriod is the period of time we want to reserve for that amount of resource, and SCalendar is the calendar where we want to check availability. Naturally, this function returns a Bool if the amount of resources is available. Note that here we are just concerned with the amount of resources and whether there is some set of identifiers whose size is greater of equal to that amount. If we need to check if a particular set of identifiers is available for reservation, we can use the following function:

isReservAvailable :: Reservation -> SCalendar -> Bool

which is almost like the first function, but here we are taking into account the set of strings which identifies the resources we want to reserve since we are providing a Reservation as input.

Adding reservations to a Calendar

There are two pairs of functions to add reservations to a calendar:

reservPeriod' :: Reservation -> Calendar -> Maybe Calendar

which inserts reservations into a calendar without any constraint. That's it, this function does not apply any availability check before making the Reservation. That's why this function does not need a SCalendar, because it does not need to take into account the set of total available resources.

The safe version is reservPeriod (without the quote) which enforces the isReservAvailable check over that reservation before adding it. Its type is

reservePeriod :: Reservation -> SCalendar -> Maybe SCalendar

where an SCalendar is needed because we are taking into account the set of total available resources to make the validation.

The other pair of functions are quite similar but are handy for adding a list of reservations at once:

reserveManyPeriods' :: [Reservation] -> Calendar -> Maybe Calendar

which adds several reservations at once in a Calendar without any availability check.

reserveManyPeriods :: [Reservation] -> SCalendar -> Maybe SCalendar

which will return a SCalendar only with the reservations that pass the isReservAvailable test. Here we must take into consideration that reservations will be inserted in the same order they come in the input list. So, if a reservation conflicts with the ones that have been already inserted, it will not be included in the SCalendar.

Removing Reservation: Cancellations

There are two operations which allow us to remove reserved resources from a period of time:

cancelPeriod :: Cancellation -> Calendar -> Maybe Calendar

This operation takes a Cancellation and returns a Calendar with that Cancellation's set of resource identifiers subtracted from that Calendar in that Cancellation's period of time. Be careful with this operation because there is no restriction over the period you are deleting. You may be deleting from several reservations, from periods of time which are meaningless - which have already elapsed-, and so on. However, all this library is intended to be used together with some persistent storage system which will allow you to keep record of the exact dates and resources which are reserved or cancelled.

The other operation is

cancelManyPeriods :: [Cancellation] -> Calendar -> Maybe Calendar

which is handy for cancelling a list of periods at once.

Note that for cancellations we do not need a SCalendar because we don't need to make any availability check.

One important thing to note

Since this calendar implementation uses Sets and Set operations, you don't have to worry about things like updating the total number of resource identifiers for your SCalendar. You can freely remove or add identifiers to your SCalendar and there will be no conflicts while making availability checks, reservations, cancellations, and so on.

Reports

It is very useful to have an operation which can summarize some information about the state of the calendar in a given period of time. That's why this library has

periodReport :: TimePeriod  -> SCalendar -> Maybe Report

where TimePeriod is the interval of time you would like the Report to summarize and SCalendar is the calendar we are working on. This function returns a Report over that period of time with the following information:

  • totalUnits: The set of total identifiers for resources in the SCalendar, in other words, the set part of (SCalendar set calendar).
  • reservedUnits: The set of resources which have been reserved for that period of time.
  • remainingUnits: The set of remaining resources which can still be reserved without creating conflicts in a TimePeriod.

Note that totalUnits, reservedUnits, remainingUnits are all of type Set, and that the type of Report is :

data Report = Report
  { reportPeriod :: TimePeriod
  , totalUnits :: Set Text
  , reservedUnits :: Set Text
  , remainingUnits :: Set Text
  }

Have Fun!

So if you find this library useful, have fun with it in applications which need some sort of calendar and resource availability management!!

Acknowledgements

The base code for this library was written by Sebastián Pulido Gómez and was sponsored by Stack Builders

Thanks to Mark Karpov and Javier Casas for their code reviews and suggestions.

Top-Nodes Algorithm Patent information

The ideas used to implement this library come from an invention by Martin Rayrole.

This version of the algorithm invented by Martin Rayrole now does not have any patent protection. You can verify that by clicking on the Abandonment section of this web-page. Thus this now belongs to the public domain!


License

MIT, see the LICENSE file.

Contributing

Do you want to contribute to this project? Please take a look at our contributing guideline to know how you can help us build it.


Stack Builders
Check out our libraries | Join our team