This repository has all the Gerber files and respective images used in the scope of the work Gerber File Parsing for Conversion to Bitmap Image - The VINCI7D Case Study. The rendered images were obtained using the following softwares / libraries:
- V7DParser: a parser of Gerber files to bitmap images developed by CRIIS - Centre for Robotics in Industry and Intelligent Systems from INESC TEC - Institute for Systems and Computer Engineering, Technology and Science in the context of VINCI7D (link 1, link 2) project
- GerbView
- GerbLib
- Reference Gerber Viewer (ground-truth data)
- Aperture Blocks
(gbr,
render):
aperture-blocks_<V7DParser|GerbView|GerbLib>_<resolution>mm_px - Front layer of a PCB
(gbr,
render):
pcb-front_<V7DParser|GerbView|GerbLib>_<resolution>mm_px - Back layer of a PCB
(gbr,
render):
pcb-back_<V7DParser|GerbView|GerbLib>_<resolution>mm_px
- Dynamic size
(gbr,
render:
dynamic-<01-40>_<GerbLib|V7DParser>_<resolution>) - Static size
(gbr,
render:
static-<01-40>_<GerbLib|V7DParser>_<resolution>)
- Standard Apertures (C/O/P/R)
(gbr,
render):
standard-apertures_<c|o|p|r> - Aperture Block (AB) (gbr, render)
- Aperture Macro (AM)
(gbr,
render):
aperture-macro_<1-circle|4-outline|5-polygon|6-moire|7-thermal|20-vector-line|21-center-line> - Region Statement (G36/G37) (gbr, render)
- Step & Repeat (SR) (gbr, render)
Distributed under the MIT License.
See LICENSE for more information.
If you have any questions or you want to know more about the work developed by us, please contact one of the contributors of this project:
- Ricardo B. Sousa (email:feup, email:inesctec, orcid) (corresponding author)
- Cláudia Daniela Rocha (email, orcid)
- Hélio S. Mendonça (email, orcid)
- António Paulo Moreira (email, orcid)
- Manuel F. Silva (email, orcid)
R. B. Sousa, C. Rocha, H. S. Mendonça, A. P. Moreira and M. F. Silva. Gerber File Parsing for Conversion to Bitmap Image–The VINCI7D Case Study. IEEE Access, vol. 10, pp. 69659-69679, 2022. DOI: 10.1109/ACCESS.2022.3187042
- CRIIS - Centre for Robotics in Industry and Intelligent Systems from INESC TEC - Institute for Systems and Computer Engineering, Technology and Science
- Faculty of Engineering, University of Porto (FEUP)
- ISEP - School of Engineering of the Porto Polytechnic
- Rui Azevedo - Soluções de Acabamentos e Tampografia
This work is financed by National Funds through the Portuguese funding agency, FCT - Fundação para a Ciência e a Tecnologia, within project UIDB/50014/2020. Also, we thank Rui Azevedo - Soluções de Acabamentos e Tampografia in the scope of the VINCI7D project for its support and assistance in the development of this work.