resize a partition non-interactive to its maximum size
Since using fdisk in this case is pretty complicated due to the case that non-interactive ways are probably not possible or very complicated using printf, I want to use parted resizepart for resizing a partition to its maximum size.
This can be used in scenarios like disk-resizes ( hypervisor / virtualization ). Now you need to adjust your logical volume / pv to the new size (LVM case) or you want to adjust the partition size of a normal partition.
So lets assume I want to resize partition /dev/sda1 on disk /dev/sda to its maximum possible size - how would I do this without getting asked any questions at all.
Even though parted /dev/sda resizepart 1 exists, it needs me to calculate and enter the maximum disk size - so how to automate this would be the next question - and the answer was the reason parted auto resize has been written.
- parted 3.0 or higher (otherwise probably rename
parted resizeparttoparted resize)
Script modified to run in conjunction with Drewsif/PiShrink
Will place this script in rc.local of a raspberry pi to boot on first boot.
Just define the very last partition on the SD card. It will expand to the maximum size of the card.
NOTE: will expand the partition from the start of that partition to the end of the card, so if there is a partition in between that block, might break.
Made the OS part of Raspbian to be read only, but want to be able to utilize the unused portion of a SD card to write data to it.
Script helped auto expand the writable portion of the card.
To the original author eugenmayer