Skip to content

Miner for Meowcoin which supports nvidia GPU cards for solo or pool

License

Notifications You must be signed in to change notification settings

Kudaraidee/meowpowminer

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

meowpowminer (ethminer fork with ProgPoW implementation)

Meowpowminer is a fork of Ravencoin's kawpowminer . Like kawpowminer, it is a derivative of Ethash enhanced with Programmable Proof of Work for ASIC and FPGA resistance.

Compared to kawpowminer, meowpowminer has the following differences:

  • DAG size at epoch 110 is >4GigaBytes
  • EPOCH duration is 7500 blocks
  • meowpowminer supports direct solo mining to meowcoind/meowcoin-qt without needing a stratum proxy
  • the random starting seeds are slightly different for uniqueness
  • improved detection of nVidia GPU memory size

AMD GPU cards are not currently properly supported. We hope to fix that in a future release.

You do not need this software for Meowcoin testnet. Testnet uses sha256 cpu mining (use the "setgenerate on" command in your node) Meowpowminer is for use only on Meowcoin mainnet.

====

A typical use of meowpowminer with a pool might look like: meowpowminer.exe -U -P stratum+tcp://ESDwJs2FX5zYoVnLQ7YuLZhmnsAcpKqMiq.worker@minersite.com:minerport

A typical use of meowpowminer with a local stratum solo-mining proxy might look like: meowpowminer.exe -U -P stratum+tcp://ESDwJs2FX5zYoVnLQ7YuLZhmnsAcpKqMiq.worker@127.0.0.1:3333

A typical use of meowpowminer to solo mine direct to meowcoind/meowcoin-qt might look like: meowpowminer.exe -U -P http://mynodeusername:mynodepassword@127.0.0.1:8819 (specify miningaddress="youraddress" in meowcoin.conf)

====

Remember that you need to have CUDA installed on your system in order for meowpowminer to work. Get it from nVidia.

Also, if you are solo mining direct to meowcoind or meowcoin-qt, before launching meowpowminer, make sure that: * the node is fully syncd * the node is listening on the RPC port (8819 for mainnet) * the node has miningaddress="youraddress" set in the meowcoin.conf file * the node has rpcuser and rpcpassword set in the meowcoin.conf file.

===============

evrprogpowpow miner with OpenCL, CUDA and stratum support

meowpowminer is an ProgPoW GPU mining worker: with meowpowminer you can mine Meowcoin, which relies on an ProgPoW-based Proof of Work thus including Ethereum ProgPoW and others. This is the actively maintained version of meowpowminer. It originates from the ethminer project. Check the original ProgPoW implementation and EIP-1057 for specification.

Features

  • First commercial ProgPOW Meowcoin miner software for miners.
  • OpenCL mining
  • Nvidia CUDA mining
  • realistic benchmarking against arbitrary epoch/DAG/blocknumber
  • on-GPU DAG generation (no more DAG files on disk)
  • stratum mining without proxy
  • OpenCL devices picking
  • farm failover (getwork + stratum)

Table of Contents

Install

Releases

Standalone executables for Linux, macOS and Windows are provided in the Releases section. Download an archive for your operating system and unpack the content to a place accessible from command line. The meowpowminer is ready to go.

Builds Release
Last GitHub release

If you have trouble with missing .dll or CUDA errors, please install the latest version of CUDA drivers or report to project maintainers.

Usage

The meowpowminer is a command line program. This means you launch it either from a Windows command prompt or Linux console, or create shortcuts to predefined command lines using a Linux Bash script or Windows batch/cmd file. For a full list of available command, please run:

meowpowminer --help

Examples connecting to pools

Connecting to MinerMore Testnet:

./meowpowminer -P stratum+tcp://<wallet>.worker@rvnt.minermore.com:4505 or

meowpowminer.exe -P stratum+tcp://<wallet>.worker@rvnt.minermore.com:4505

Build

After cloning this repository into meowpowminer, it can be built with commands like:

Ubuntu / OSX

cd meowpowminer
git submodule update --init --recursive
mkdir build
cd build
cmake .. -DETHASHCUDA=ON -DETHASHCL=ON -DAPICORE=ON
make -sj $(nproc)

Manually define CUDA stuff like this: cmake .. -DETHASHCUDA=ON -DETHASHCL=ON -DAPICORE=ON -DCUDA_nvrtc_LIBRARY=/usr/local/cuda-12.2/targets/x86_64-linux/lib/libnvrtc.so.12.2.91

Alternatively:

cmake .. -DETHASHCUDA=ON -DETHASHCL=ON -DAPICORE=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-12.2

Windows

Prerequisites:

  1. Install Visual Studios (2019) (with the additional installation package "C++ Cmake Tools for Windows)
  2. Install latest perl to C:\Perl (https://www.perl.org/get.html) Follow the steps outlined and the default perl installtion should work

Building via Visual Studios Command Line:

Open "Developer Command Prompt for VS 2019"

  1. Open StartMenu and search for "Developer Command Prompt for VS 2019"
  2. Follow these steps:
cd C:\Users\USER_NAME\PATH_TO_MEOWPOWMINER\meowpowminer
git submodule update --init --recursive
mkdir build
cd build
cmake -G "Visual Studio 16 2019" -A X64 -H. -Bbuild -DETHASHCL=ON -DETHASHCUDA=ON -DAPICORE=ON ..
cd build
cmake --build . --config Release

(Yes, two nested build/build directories.)

Building via Visual Studios GUI (This build doesn't seem to work for some 20XX Nvidia cards)

  1. Open Visual Studios
  2. Open CMakeLists.txt file with File->Open->CMake
  3. Wait for intelligence to build the cache (this can take some time)
  4. Build the project (CTRL+SHIFT+B) or find the build command in the menu

ProgPoW can be tuned using the following parameters. The proposed settings have been tuned for a range of existing, commodity GPUs:

  • PROGPOW_PERIOD: Number of blocks before changing the random program
  • PROGPOW_LANES: The number of parallel lanes that coordinate to calculate a single hash instance
  • PROGPOW_REGS: The register file usage size
  • PROGPOW_DAG_LOADS: Number of uint32 loads from the DAG per lane
  • PROGPOW_CACHE_BYTES: The size of the cache
  • PROGPOW_CNT_DAG: The number of DAG accesses, defined as the outer loop of the algorithm (64 is the same as Ethash)
  • PROGPOW_CNT_CACHE: The number of cache accesses per loop
  • PROGPOW_CNT_MATH: The number of math operations per loop

The value of these parameters has been tweaked to use 0.9.4 specs with a PROGPOW_PEROD of 3 to fit Meowcoin's blocktimes. See this medium post for details.

Parameter 0.9.2 0.9.3 0.9.4 MeowPow
PROGPOW_PERIOD 50 10 3 6
PROGPOW_LANES 16 16 16 16
PROGPOW_REGS 32 32 32 16
PROGPOW_DAG_LOADS 4 4 4 4
PROGPOW_CACHE_BYTES 16x1024 16x1024 16x1024 16x1024
PROGPOW_CNT_DAG 64 64 64 64
PROGPOW_CNT_CACHE 12 11 11 6
PROGPOW_CNT_MATH 20 18 18 9

Epoch length = 12000 blocks

Maintainers & Authors

Discord

The list of current and past maintainers, authors and contributors to the meowpowminer project. Ordered alphabetically. Contributors statistics since 2015-08-20.

Name Contact
Zachary Price @zachchan105 LTC: ltc1q46x3m5rwywa6ymfzqacmzasnqeua6umt6n96w6
Hans Schmidt @hans-schmidt ---
Jeremy Anderson @Blondfrogs ---
Traysi @traysi --
Andrea Lanfranchi @AndreaLanfranchi ETH: 0xa7e593bde6b5900262cf94e4d75fb040f7ff4727
EoD @EoD
Genoil @Genoil
goobur @goobur
Marius van der Wijden @MariusVanDerWijden ETH: 0x57d22b967c9dc64e5577f37edf1514c2d8985099
Paweł Bylica @chfast ETH: 0x8FB24C5b5a75887b429d886DBb57fd053D4CF3a2
Philipp Andreas @smurfy
Stefan Oberhumer @StefanOberhumer
ifdefelse @ifdefelse
Won-Kyu Park @hackmod ETH: 0x89307cb2fa6b9c571ab0d7408ab191a2fbefae0a
Ikmyeong Na @naikmyeong

Contribute

All bug reports, pull requests and code reviews are very much welcome.

License

Licensed under the GNU General Public License, Version 3.

F.A.Q

Why is my hashrate with Nvidia cards on Windows 10 so low?

The new WDDM 2.x driver on Windows 10 uses a different way of addressing the GPU. This is good for a lot of things, but not for ETH mining.

  • For Kepler GPUs: I actually don't know. Please let me know what works best for good old Kepler.
  • For Maxwell 1 GPUs: Unfortunately the issue is a bit more serious on the GTX750Ti, already causing suboptimal performance on Win7 and Linux. Apparently about 4MH/s can still be reached on Linux, which, depending on ETH price, could still be profitable, considering the relatively low power draw.
  • For Maxwell 2 GPUs: There is a way of mining ETH at Win7/8/Linux speeds on Win10, by downgrading the GPU driver to a Win7 one (350.12 recommended) and using a build that was created using CUDA 6.5.
  • For Pascal GPUs: You have to use the latest WDDM 2.1 compatible drivers in combination with Windows 10 Anniversary edition in order to get the full potential of your Pascal GPU.

Why is a GTX 1080 slower than a GTX 1070?

Because of the GDDR5X memory, which can't be fully utilized for Meowcoin mining (yet).

Are AMD cards also affected by slowdowns with increasing DAG size?

Only GCN 1.0 GPUs (78x0, 79x0, 270, 280), but in a different way. You'll see that on each new epoch (30K blocks), the hashrate will go down a little bit.

Can I still mine Meowcoin with my 2GB GPU?

Not really, your VRAM must be above the DAG size (Currently about 3 GB.) to get best performance. Without it severe hash loss will occur.

What are the optimal launch parameters?

The default parameters are fine in most scenario's (CUDA). For OpenCL it varies a bit more. Just play around with the numbers and use powers of 2. GPU's like powers of 2.

What does the --cuda-parallel-hash flag do?

@davilizh made improvements to the CUDA kernel hashing process and added this flag to allow changing the number of tasks it runs in parallel. These improvements were optimised for GTX 1060 GPUs which saw a large increase in hashrate, GTX 1070 and GTX 1080/Ti GPUs saw some, but less, improvement. The default value is 4 (which does not need to be set with the flag) and in most cases this will provide the best performance.

What is meowpowminer's relationship with Genoil's fork?

Genoil's fork was the original source of this version, but as Genoil is no longer consistently maintaining that fork it became almost impossible for developers to get new code merged there. In the interests of progressing development without waiting for reviews this fork should be considered the active one and Genoil's as legacy code.

Can I CPU Mine?

No.

CUDA GPU order changes sometimes. What can I do?

There is an environment var CUDA_DEVICE_ORDER which tells the Nvidia CUDA driver how to enumerates the graphic cards. The following values are valid:

  • FASTEST_FIRST (Default) - causes CUDA to guess which device is fastest using a simple heuristic.
  • PCI_BUS_ID - orders devices by PCI bus ID in ascending order.

To prevent some unwanted changes in the order of your CUDA devices you might set the environment variable to PCI_BUS_ID. This can be done with one of the 2 ways:

  • Linux:

    • Adapt the /etc/environment file and add a line CUDA_DEVICE_ORDER=PCI_BUS_ID
    • Adapt your start script launching meowpowminer and add a line export CUDA_DEVICE_ORDER=PCI_BUS_ID
  • Windows:

    • Adapt your environment using the control panel (just search setting environment windows control panel using your favorite search engine)
    • Adapt your start (.bat) file launching meowpowminer and add a line set CUDA_DEVICE_ORDER=PCI_BUS_ID or setx CUDA_DEVICE_ORDER PCI_BUS_ID. For more info about set see here, for more info about setx see here

nvrtc64_102_0.dll not found...

Error: The code execution cannot be processed because nvrtc64_102_0.dll was not found.
or
error while loading shared libraries: libnvrtc.so.10.2: cannot open shared object file: No such file or directory

You have to upgrade your Nvidia drivers. Install cuda 10.2.

About

Miner for Meowcoin which supports nvidia GPU cards for solo or pool

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 85.4%
  • C 6.7%
  • Cuda 4.9%
  • CMake 1.7%
  • Shell 1.3%