create-svelte

Everything you need to build a Svelte project, powered by create-svelte.

Creating a project

If you're seeing this, you've probably already done this step. Congrats!

# create a new project in the current directory
npm init svelte@next

# create a new project in my-app
npm init svelte@next my-app

Note: the @next is temporary

Developing

Once you've created a project and installed dependencies with npm install (or pnpm install or yarn), start a development server:

npm run dev

# or start the server and open the app in a new browser tab
npm run dev -- --open

Building

To create a production version of your app:

npm run build

You can preview the production build with npm run preview.

To deploy your app, you may need to install an adapter for your target environment.

---

Section 1: Get started here

• redis is a database faster than treditional databases.
• redis is faster because it uses the ram.
• radis stores data in simple data structures.
• redis has a small number of feature set

Instructions:

• create a redis in redis.com
• create a free subscription
• create a new database
• connect the database in rbook.cloud

Simple command testing:

    SET key value

---

Section 2: Commands for Adding and Querying data

Strings:

• set string:

SET message "Hellow World!"

• get string:

GET message

• Check out the commands from redis official docs
• see the diagrams in section 2
• GET: get a value using key: GET message
• NX: create if the key doesn't exist yet : SET color blue NX / SETNX color blue
• EX: remove the record after limit time : SETEX message 2 "Hello World!"
• MSET: multiple set values for keys : MSETNX colofgsdr blue moshfdel toyota
• MGET: multiple get values for keys : MGET colofgsdr moshfdel
• DEL: deletes the key: DEL message
• GETRANGE: gets a string upon (start index - end index) position
• SETRANGE: sets a string upon from index value: SETRANGE model 2 bule
• using radis we can make robust minimized datas and retrieve them faster as well

Numbers:

• SET: set a number : SET key 1
• INCR: increament a key with 1 : INCR key
• DECR: decrement a key with 1 : DECR key
• INCRBY: increament a number by given limit : INCRBY key 10
• DECRBY: decrement a number by given limit : DECRBY key 5
• INCRBYFLOAT: increament a number float wise limit : INCRBYFLOAT key -2.55

• Redis is synchronous and single threaded by nature.

---

Section 3: E-commerce App Setup

Law of caching:

Redis Design Methodology:

• Figure out what queries we need to answer
• Structure data to best answer those queries

Key naming conventions:

• Keys should be unique
• Other engineers should understand what a key is for
• Tip - use functions to generate your key names so you never make a typo
• Extremely common practice is to use a ':' to separate different parts of the key
• Small twist on common practice - we are going to use a # before unique ID's to make implementing search easier : users#45

Section 4: Local redis Setup

Install docker desktop

• run

docker run -d --name redis-stack-server -p 6379:6379 redis/redis-stack-server:latest

• moderate

docker exec -it redis-stack-server redis-cli

• connection for local redis with rbay:

REDIS_HOST=localhost
REDIS_PORT=6379
REDIS_PW=

• If you want to connect RBook to your local copy of Redis, you will need to run RBook locally.

  • To run RBook locally, run npx rbook at your terminal.

  • Navigate to localhost:3050

  • Open the connection settings window

  • Enter a host of 'localhost'

  • Enter a port of 6379

  • Leave the password blank

  • When running RBook locally, any notebooks you create will be added to the folder you ran npx rbook in.

---

Section 5: Hash Data Structures

Initial:

• A hash in redis can be an object of key value pairs but they will not be deeply nested:

  • will work:

    {
        "name": "IQ & CO.",
        "created": 1989,
        "industry": "Technology"
    }

• in redis hashes there can only be number and strings as value for the keys

• HSET: set multiple key value pare under a mother key : HSET company name iq industry tech age 12.3 estd 1945

• HGET: get a single key value : HGET compnay industry

• HGETALL: gets all the key values from a mother key : HGETALL company

• HEXISTS: checks if a key under monther key exists: HEXISTS company age

• DEL: deleted all the key value pair under a mother key: DEL company

• HDEL: deletes a single key value under mother key : HDEL company age

• HINCRBY: increament a certain key's value under mother key which must be an integer : HINCRBY company estd 10

• HINCRBYFLOAT: increament a certain key's value under mother key which must be an float : HINCRBYFLOAT company a 10.5

• HSTRLEN: gives the length of the value under a key under mother key : HSTRLEN company industry

• HKEYS: gives all the keys under the mother key: HKEYS company

• HVALS: gives all the values under all the keys under the mother key : HVALS company

• HMSET: can set a new key and value under the mother key: HMSET company newKey "new value" [The same can be achieved using HINCRBY]

Section 6: Redis has gotchas!

• please check out the file in sandbox: index.ts

Section 7: Powerful design pattern

• SQL Database Design Methodology

  • Put the data in tables
  • Figure out how we will query it

• Redis Design Methodology

  • Figure out what queries we need to answer
  • Structure data to best answer those queries

• Reasons to Store as Hash

  • The record has many attributes
  • A collection of these records have to be sorted many different ways
  • Often need to access a single record at a time

• Don't Use Hashes When...

  • The record is only for counting or enforcing uniqueness
  • Record stores only one or two attributes
  • Used only for creating relations between different records
  • The record is only used for time series data

---

Section 8: Pipelining commands

• Redis does not give power to fetch multiple hashes(IDs) in one single command

  • Possible solutions [1]:
    • Loop through the Ids and execute HGETALL and get the records one by one.
    • We create a hash for each id and execute the HGETALL command each time of creating the id. meaning:
      • the loop is running
      • the loop is creating hash
      • the loop is executing individual command
    • !!! THIS IS NOT EFFECIENT
  • Possible solutions [2]:
    • We create batch of command using loop
    • we execute HGETALL command for all the ids in one go.
      • we create hash with ids in a loop but
      • we tell the loop not to send the request to redis yet
      • we complete the loop
      • we complete creating the batch of HGETALL
      • we give the list of request to redis
      • redis gives us a list of records

---

Section 9: Enforcing uniqueness with set

• Redis has a special feature called set

  • In set:

    • [SADD] we can add unique value in a set

      • If we keep adding the same value its not going to be added in the set
      • Example:
        • SADD: Add a unique value with a key: SADD name Iqbal -> will return 1 -> Its going to add iqbal to a set of name.
          • if we try to add SADD name Iqbal -> will return 0 -> Its not going to add any value in the key of name.

    • [SUNION] we can keep and show the same values existing in saparate sets

      • SADD colors:1 red blue green

      • SADD colors:2 yellow purple green

      • SADD colors:3 shen green ken

        • SUNION colors:1 colors:2 colors:3 -> will give us the combined values of unions from the sets:

          • [ "red", "blue", "green", "yellow", "purple", "white", "shen", "ren", "ken" ]

        • SINTER colors:1 colors:2 colors:3 -> will give us only the common value from all the sets

          • [ "blue" ]

        • SDIFF colors:1 colors:2 colors:3 -> will only give us the unique value that only exist in x but not in n numbers in sets.

          • [ "red" ]

        • SINTERSTORE color:result colors:1 colors:2 colors:3 -> will store the common values in a new key

        • SMEMBERS color:result -> will show the values stored in the new key [ "blue", "green" ]

        • SISMENBER color:result blue -> will give 1 if blue exists on color:result key and 0 if not exist

        • SMISMEMBER color:result blue green -> will give us an array of true and false.

          • [ 1, 1 ]

        • SCARD color:result -> this gives the number of elements in a key

        • SSCAN colors:1 0 COUNT 2 -> this gives the paginated data. 0 is the page number in here. 2 is the number of element to show in a page.

• • Use cases for SETS of Redis:
    • Enforcing uniqueness of any value : suppose a user wants to register but in our cache we have the user already registered.
    • Creating a relationship between different records:
    • Finding common attributes between different things: SINTER to see the common items liked by 2 users.
    • General list of elements where order doesn't matter:

---

Section 10: Sorted SET

• Redis has a special feature called Sorted set

  • In sorted set all the members are sorted from low to high. 0 1 2 3 4 5....

  • Sorted Set:

    • ZADD is used to add a member-score pair to a sorted set. The command is a little unusual

      • you first provide the score then the member: ZADD products 45 monitor

    • ZSCORE returns the score of a member: ZSCORE products monitor

    • ZREM removes a member-value pair: ZREM products monitor

    • Reference:

        DEL products
    
        ZADD products 45 cpu
        ZADD products 10 keyboard
        ZADD products 55 power
    
        ZCARD products
    

    • ZCARD returns the total number of members in a sorted set: ZCARD products => 3.

    • ZCOUNT is very similar to ZCARD, but includes from filtering criteria.

      You can use ZCOUNT to find the number of members between a range of two scores. By default, these scores are inclusive.

      There is a variation on the score syntax. Adding in an opening paren before a score (E.g. (45) changes the comparison to 'greater than' when applied to the lower bounds, or 'less than' when applied to the upper bound.

      You can also use -inf or +inf to specify negative or positive infinity, respectively.

      • ZCOUNT -inf 55 => 3

    • ZPOPMIN removes and returns the member with the lowest score: ZPOPMIN products 3 => ["keyboard","10","cpu","45","power","55"]

    • ZPOPMAX removes and returns the member with the greatest score: ZPOPMAX products 2 => ["power","55","cpu","45"]

    • ZINCRBY adjusts the score of an existing member-score pair: ZINCRBY products 15 cpu => "60"

      • Provide a negative number to subtract from a score: ZINCRBY products -15 cpu => "30"
      • New key with value can also be added using ZINCRBY: ZINCRBY products -15 x => "-15"

    • ZRANGE Filter the set and find value from 0-60 and limit the result from index 1-3: ZRANGE products 0 60 BYSCORE LIMIT 0 3 => ["keyboard","cpu","power"]

      • also can be applied using WITHSCORE -inf +inf (45 45)
      • REV: will reverse the current set and after that will apply other commands to the set