Skip to content

AerialMantis/cppcon-parallelism-class

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

89 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CppCon 2018: Parallel Programming with Modern C++: from CPU to GPU

This repository provides set up instructions and the exerises for the CppCon parallel programing class.

Pre-requisites

The majority of the exercises will require a only standard C++17 compliant compiler, however if for any reason you cannot use a C++17 compiler, using online compilers such as https://godbolt.org/ and https://wandbox.org/ will suffice.

Some later exercises, those which involve programming for the GPU will have some further dependencies. You will need to install OpenCL drivers for the GPU on your laptop and ComputeCpp SYCL (see instructions below). If you do not have a GPU on your laptop or cannot find suitable OpenCL drivers for your GPU then the CPU will suffice. If you have trouble setting this up or for any reason are unable to install the requirements on your laptop we are providing a docker image which will provide OpenCL drivers for Intel CPU and ComputeCpp SYCL (see instructions below).

SYCL Exercises

Exercise Source Solution
SYCL 00: Installing ComputeCpp NA NA
SYCL 01: Configuring a Queue source solution
SYCL 02: Hello World source solution
SYCL 03: Vector Add source solution
SYCL 04: Image Grayscale source solution
SYCL 05: Transpose source solution

Instructions

Installing OpenCL drivers:

Installing ComputeCpp:

Setting up docker image:

  • Install Docker CE from https://docs.docker.com/install/.

  • Pull the computecpp_ubunutu1604 docker image:

    docker pull aerialmantis/computecpp_ubuntu1604

  • Run the computecpp_ubuntu1604 docker image:

    docker run --rm -it aerialmantis/computecpp_ubuntu1604

Preparing this repository

  • Once you've got OpenCL and ComputeCpp SYCL setup or you have the docker image setup you can clone this repository to verify your setup and prepare yourself for the class.

  • Pull this repository:

    git clone https://github.com/AerialMantis/cppcon-parallelism-class.git

  • Create a build directory:

    cd cppcon2018-parallelism-class/ mkdir build cd build

  • Run CMake to configure solution (local setup):

    cmake ../ -G[Generator] -DCMAKE_BUILD_TYPE=[Debug/Release]

  • Run CMake to configure solution (docker image):

    cmake ../ -GNinja -DCMAKE_BUILD_TYPE=Debug -DOpenCL_LIBRARY=${OCL_LIB}/libOpenCL.so -DOpenCL_INCLUDE_DIR=${OCL_INC}

  • Note that if you are using an NVidia GPU, in order to use the experimental ComputeCpp SYCL support you must include the following in the above CMake command:

    -DCOMPUTECPP_BITCODE=ptx64

  • Note that you can enable building the solutions by adding the following in the above CMake command:

    -DCPPCON_ENABLE_SOLUTIONS=ON

  • Note that you can disable the SYCL tests in the case you are not able to use ComputeCpp by adding the following in the above CMake command:

    -DCPPCON_ENABLE_SYCL=OFF

  • Build your solution:

    cmake --build .

  • Verify your setup by running the verify_sycl sample:

    ./examples/example_verify_sycl

Installing GCC 8 (Ubuntu 16.04)

  • To install GCC 8 on Ubuntu 16.04 you need update the apt-get repository:

RUN apt-get install software-properties-common RUN add-apt-repository ppa:ubuntu-toolchain-r/test RUN apt-get update RUN apt-get install g++-8

About

Exercises for CppCon 2018 class on parallelism

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published