celerybeat

#!/bin/sh
# ============================================
#  celerybeat - Starts the Celery periodic task scheduler.
# ============================================
#
# :Usage: /etc/init.d/celerybeat {start|stop|restart|status}
# :Configuration file: /etc/sysconfig/celerybeat
#
# See http://docs.celeryproject.org/en/latest/tutorials/daemonizing.html

### BEGIN INIT INFO
# Provides:          celerybeat
# Required-Start:    $network $local_fs $remote_fs
# Required-Stop:     $network $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: celery task worker daemon
### END INIT INFO
#
#
# To implement separate init scripts, do NOT copy this script.  Instead,
# symlink it.  I.e., if my new application, "little-worker" needs an init, I
# should just use:
#
#   ln -s /etc/init.d/celerybeat /etc/init.d/little-worker
#
# You can then configure this by manipulating /etc/sysconfig/little-worker.
#
# Setting `prog` here allows you to symlink this init script, making it easy
# to run multiple processes on the system.

# If we're invoked via SysV-style runlevel scripts we need to follow the 
# link from rcX.d before working out the script name.
if [[ `dirname $0` == /etc/rc*.d ]]; then
    target="$(readlink $0)"
else
    target=$0
fi

prog="$(basename $target)"

# Source the centos service helper functions
source /etc/init.d/functions
# NOTE: "set -e" does not work with the above functions,
# which use non-zero return codes as non-error return conditions

# some commands work asyncronously, so we'll wait this many seconds
SLEEP_SECONDS=5

DEFAULT_PID_FILE="/var/run/celery/$prog.pid"
DEFAULT_LOG_FILE="/var/log/celery/$prog.log"
DEFAULT_LOG_LEVEL="INFO"
DEFAULT_NODES="celery"

CELERY_DEFAULTS=${CELERY_DEFAULTS:-"/etc/sysconfig/$prog"}

test -f "$CELERY_DEFAULTS" && . "$CELERY_DEFAULTS"

# Set CELERY_CREATE_DIRS to always create log/pid dirs.
CELERY_CREATE_DIRS=${CELERY_CREATE_DIRS:-0}
CELERY_CREATE_RUNDIR=$CELERY_CREATE_DIRS
CELERY_CREATE_LOGDIR=$CELERY_CREATE_DIRS
if [ -z "$CELERYBEAT_PID_FILE" ]; then
    CELERYBEAT_PID_FILE="$DEFAULT_PID_FILE"
    CELERY_CREATE_RUNDIR=1
fi
if [ -z "$CELERYBEAT_LOG_FILE" ]; then
    CELERYBEAT_LOG_FILE="$DEFAULT_LOG_FILE"
    CELERY_CREATE_LOGDIR=1
fi

CELERYBEAT_LOG_LEVEL=${CELERYBEAT_LOG_LEVEL:-${CELERYBEAT_LOGLEVEL:-$DEFAULT_LOG_LEVEL}}
CELERYBEAT=${CELERYBEAT:-"${CELERY_BIN} beat"}
CELERYBEAT=${CELERYBEAT:-$DEFAULT_CELERYBEAT}
CELERYBEAT_NODES=${CELERYBEAT_NODES:-$DEFAULT_NODES}

# This is used to change how Celery loads in the configs.  It does not need to
# be set to be run.
export CELERY_LOADER

if [ -n "$2" ]; then
    CELERYBEAT_OPTS="$CELERYBEAT_OPTS $2"
fi

CELERYBEAT_OPTS=${CELERYBEAT_OPTS:-"--app=$CELERY_APP"}
CELERYBEAT_LOG_DIR=`dirname $CELERYBEAT_LOG_FILE`
CELERYBEAT_PID_DIR=`dirname $CELERYBEAT_PID_FILE`

# Extra start-stop-daemon options, like user/group.
if [ -n "$CELERYBEAT_USER" ]; then
    DAEMON_OPTS="$DAEMON_OPTS --uid=$CELERYBEAT_USER"
fi
if [ -n "$CELERYBEAT_GROUP" ]; then
    DAEMON_OPTS="$DAEMON_OPTS --gid=$CELERYBEAT_GROUP"
fi

if [ -n "$CELERYBEAT_CHDIR" ]; then
    DAEMON_OPTS="$DAEMON_OPTS --workdir=$CELERYBEAT_CHDIR"
fi

check_dev_null() {
    if [ ! -c /dev/null ]; then
        echo "/dev/null is not a character device!"
        exit 75  # EX_TEMPFAIL
    fi
}


maybe_die() {
    if [ $? -ne 0 ]; then
        echo "Exiting: $* (errno $?)"
        exit 77  # EX_NOPERM
    fi
}

create_default_dir() {
    if [ ! -d "$1" ]; then
        echo "- Creating default directory: '$1'"
        mkdir -p "$1"
        maybe_die "Couldn't create directory $1"
        echo "- Changing permissions of '$1' to 02755"
        chmod 02755 "$1"
        maybe_die "Couldn't change permissions for $1"
        if [ -n "$CELERYBEAT_USER" ]; then
            echo "- Changing owner of '$1' to '$CELERYBEAT_USER'"
            chown "$CELERYBEAT_USER" "$1"
            maybe_die "Couldn't change owner of $1"
        fi
        if [ -n "$CELERYBEAT_GROUP" ]; then
            echo "- Changing group of '$1' to '$CELERYBEAT_GROUP'"
            chgrp "$CELERYBEAT_GROUP" "$1"
            maybe_die "Couldn't change group of $1"
        fi
    fi
}


check_paths() {
    if [ $CELERY_CREATE_LOGDIR -eq 1 ]; then
        create_default_dir "$CELERYBEAT_LOG_DIR"
    fi
    if [ $CELERY_CREATE_RUNDIR -eq 1 ]; then
        create_default_dir "$CELERYBEAT_PID_DIR"
    fi
}

create_paths() {
    create_default_dir "$CELERYBEAT_LOG_DIR"
    create_default_dir "$CELERYBEAT_PID_DIR"
}

export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"

stop() {
    [[ ! -f "$CELERYBEAT_PID_FILE" ]] && echo "$prog is stopped" && return 0
 
    local one_failed=
    echo -n $"Stopping $prog: "

    # killproc comes from 'functions' and brings three nice features:
    #  1. sending TERM, sleeping, then sleeping more if needed, then sending KILL
    #  2. handling 'success' and 'failure' output
    #  3. removes stale pid files, if any remain
    killproc -p "$CELERYBEAT_PID_FILE" -d "$SLEEP_SECONDS" $prog || one_failed=true
    echo

    [[ "$one_failed" ]] && return 1 || return 0
}

start() {
    echo -n $"Starting $prog: "

    # If Celery is already running, bail out
    if [[ -f "$CELERYBEAT_PID_FILE" ]]; then
        echo -n "$prog is already running. Use 'restart'."
        failure
        echo
        return 1
    fi

    $CELERYBEAT $CELERYBEAT_OPTS $DAEMON_OPTS --detach         \
                         --pidfile="$CELERYBEAT_PID_FILE"      \
                         --logfile="$CELERYBEAT_LOG_FILE"      \
                         --loglevel="$CELERYBEAT_LOG_LEVEL"

    if [[ "$?" == "0" ]]; then
        # Sleep a few seconds to give Celery a chance to initialize itself.
        # This is useful to prevent scripts following this one from trying to
        # use Celery (or its pid files) too early.
        sleep $SLEEP_SECONDS
        if [[ -f "$CELERYBEAT_PID_FILE" ]]; then
            success
            echo
            return 0
        else  # celerybeat succeeded but no pid files found
            failure
        fi
    else  # celerybeat did not succeed
        failure
    fi
    echo
    return 1
}

check_status() {
    status -p "$CELERYBEAT_PID_FILE" $"$prog" || return 1
    return 0
}

case "$1" in
    start)
        check_dev_null
        check_paths
        start
    ;;

    stop)
        check_dev_null
        check_paths
        stop
    ;;

    status)
        check_status
    ;;

    restart)
        check_dev_null
        check_paths
        stop && start
    ;;

    *)
        echo "Usage: /etc/init.d/$prog {start|stop|restart|status}"
        exit 3
    ;;
esac

exit $?