Voxelab Aquila S2 does not support inductive probe?

[noyhay1]

Tried downloading different versions for N32
Aquila_N32_UBL-ProUI-MPC-MP.bin
Aquila_N32_UBL-ProUI-MP.bin
Aquila_N32_UBL-ProUI-MPC.bin
and others, my extruder crashes into the bed, although the LED on the sensor goes out when it gets close
This was a standard sensor in my configuration, I do not have the knowledge to edit the firmware

inductive/ezabl sensor?
I understand that you need to add a configuration?
https://github.com/mriscoc/Special_Configurations/releases/EZABL
https://reprap.org/forum/read.php?415,893383,893481

[Mik-S-UMS]

Try the X3 one as that has the same sensor and is basically the same printer.

[noyhay1]

I read about this and tried to install the firmware from X3, as far as I know the developer had no information about this sensor, maybe he found a solution now

[Mik-S-UMS]

The X3 specific bin has been reported as working with that sensor by several people.
If you try it what does it do when homing? have you changed the bed with something else?

[noyhay1]

thank you very much, you were right, I installed it from X3 and it worked, I have a question: what is the parameter in the firmware name PWRLOSS?

[classicrocker883]

PWRLOSS is for if you want the powerloss feature, when the power goes out it saves that point and continues. except some other features may not be available because it uses more memory, so those had to be disabled in firmware.

[noyhay1]

thank you for your efforts, please add to the description/title that an inductive sensor is supported so that there are no more questions like this

[classicrocker883]

yeah thats on my list of todo. I wasn't sure which machines had that inductive sensor now i know