2.0 is out! #94
Replies: 7 comments 29 replies
-
|
Great milestone!! A heads-up: I just installed it on my FS-5000 and the way the script bosean-fs5000-install.bat/flashtool.bat is written is making it flash radpro-bosean-fs5000-landscape-2.0.bin instead of the non-landscape one. Had to force the correct firmware manually. And, perhaps the landscape thing can be one of the Display options? So a single firmware would satisfy both. Great work! Thank you!
|
Beta Was this translation helpful? Give feedback.
-
|
I just checked the scripts and found no error. Are you sure? |
Beta Was this translation helpful? Give feedback.
-
|
Ran this on cmd: D:\Downloads\radpro-flashtool-2.0\bosean>bosean-fs5000-install.bat At the end I had the screen rotated by 90 degrees. Removed radpro-bosean-fs5000-landscape-2.0.bin from the firmware directory and ran the above .bat again (didn't type anything, just used arrow key to select last command). This time it flashed the non-rotated screen. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
That was very helpful in locating the error: it was a file naming issue. Fixed. |
Beta Was this translation helpful? Give feedback.
-
|
Hi,
Any thoughts would be very welcome. Jon |
Beta Was this translation helpful? Give feedback.
-
|
Please copy the .bat file contained in the following file to the |
Beta Was this translation helpful? Give feedback.
-
|
Could you test https://github.com/Gissio/radpro/releases/tag/2.0.1beta3? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, no problem. |
Beta Was this translation helpful? Give feedback.
-
|
2.0.1beta3 version installs flawlessly on my GC-01. All functions are working okay, and stable after a couple of hours testing. Thank you for this update, let me know if I can be of further help. |
Beta Was this translation helpful? Give feedback.
-
|
Here is text file as requested. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry: could you download the .zip file from my previous post again, and try again? |
Beta Was this translation helpful? Give feedback.
-
|
Here you go - this one is 28kb instead of 14kb |
Beta Was this translation helpful? Give feedback.
-
|
Thanks to your dump I found the error! Will be fixed in the upcoming release. |
Beta Was this translation helpful? Give feedback.
-
|
Glad I could help! 🙂 |
Beta Was this translation helpful? Give feedback.
-
|
Having the same issue here with my FNIRSI GC-01. None of the easy firmware loading methods work, so I resorted to an STLink clone dongle from Amazon. I'm getting the same "halted due to debug-request" error: I notice you asked JonWhite to run the debug uploading tool and post the results. Here's the results I'm getting. I also tried downloading the link you posted about...doesn't seem to exist anymore. Any / all help appreciate! thanks much, |
Beta Was this translation helpful? Give feedback.
-
|
easiest way to load the firmware:
viola your device will restart with radpro (don't ask me why but it just works 100% of the time, at least for the GC01 - easiest to use a Linux with GUi like Gnome, if you only have a terminal check the discussion for the specific command to, cp isn't enough, if i remember right you have to cat) |
Beta Was this translation helpful? Give feedback.
-
|
Well...it gets more odd. I decided to try Linux again...and it will open a drive called "GC01 BOOT". I can copy the firmware file there, and it seems to copy okay. I can't copy it a second time...it says there's not enough disk space. I saw the other post about using cat to copy it the second time (or both times) and that appears to work...but the unit doesn't restart and when I power cycle it, I do see the drive again with the "Readme.txt" (completely blank!). VERY STRANGE. |
Beta Was this translation helpful? Give feedback.
-
|
I had the same issues with the usb window, and then an unresponsive device. The easiest solution going forward is to solder a 4 pin header to the gc-01 board and then use an STLink adaptor to run the update. This also makes any future updates or testing a whole lot easier. Info should all be on here, if not ask Gissio - he is super helpful. (STLink adaptor & 50 pack of headers from Amazon for less than £10) |
Beta Was this translation helpful? Give feedback.
-
|
seems a bit weird that it won't let you overwrite - has it changed the filename on the GC01 drive after the first copy? it should just overwrite and prompt to confirm, then boot radpro - if it does maybe try renaming the file to match before the 2nd copy - keep the window open between copies - the filename doesn't matter it looks for the extension - maybe the original filename is too long and it truncates it seems yours is slightly different but at least you're making progress, especially that your PC sees the USB device |
Beta Was this translation helpful? Give feedback.
-
|
btw are you sure you're using the correct firmware for your MCU? |
Beta Was this translation helpful? Give feedback.
-
|
look inside the full repo zip file, in documents>gc01 you'll find an original firmware - copy that twice and you should get it to boot again with the original system |
Beta Was this translation helpful? Give feedback.
-
|
Evening all! The oddness continues. The textfile at one point did go to "APPERR" at one point, but has stayed at "ReadMe.txt" many attempts after that. For sure, I'm using the right file, I've got the CH32F103R8 (WCH) microprocessor. What's REALLY ODD NOW is that the STLINK dongle doesn't even find the processor. The screen also stopped working. I think I've had totally messed up this unit. I've had it for at least a year now and had a good bit of fun with it, so can't say I'm too upset if it is indeed dead now. All of this is very, very strange! |
Beta Was this translation helpful? Give feedback.
-
|
Oh wow - the battery in mine was stone cold dead. Unfortunately, after replacing it with a fresh new one, I'm having the same issues as above. I can see the GC01 BOOT drive in Linux, can copy the new firmware over twice, and it won't reboot, and won't load. Using the STLINK I get the same "halted due to debug request." Screen stays blank the whole time, so I'm pretty sure I've somehow smoked my unit. :( |
Beta Was this translation helpful? Give feedback.
-
|
are you able to flash one of the standard/older firmware versions from the repo doc folder? gissio might be able to help, he checks in every couple of weeks. |
Beta Was this translation helpful? Give feedback.
-
|
My GC-01 was apparently completely 'bricked', but I got it working again with help from Gissio. He is super helpful. Have you tried flashing with main battery disconnected? |
Beta Was this translation helpful? Give feedback.
-
Why Gissio not write for me in my disscussion(? |
Beta Was this translation helpful? Give feedback.
-
|
I'm sure he will help you if he can, but he is in a different time zone - US I think - give it time, there is life outside GitHub.😉 |
Beta Was this translation helpful? Give feedback.
-
Hello. Could you help me with my problem that I described in the next discussion? I kindly ask you to give me some time. |
Beta Was this translation helpful? Give feedback.
-
|
Replied to in the other thread. |
Beta Was this translation helpful? Give feedback.
-
The long-awaited Rad Pro 2.0 is out, with support for several devices: FS2011, Bosean FS-600, FS-1000, FS-5000 and FNIRSI GC-01.
The UI has been updated to the OpenBridge 5.0 design system, improving legibility under sunlight.
The default conversion factor for J613/J614 tubes has also been changed to 30 cpm/µSv/h, improving accuracy.
The FNIRSI GC-01 display panel settings (added in 2.0rc5) have been removed. And the granularity and range of the "SET tubeHVFrequency" and "SET tubeHVDutyCycle" data communication requests have been increased, to CPU clock resolution and 100 Hz-100 kHz and 0 %-100 %, respectively (not stored on power-off).
Enjoy!
Beta Was this translation helpful? Give feedback.
All reactions